 |
Air Dryer Training
This highly intense Hands-On 2-day or 3-day course, depending on the number of Dryers to be covered. (ADK, Chatlos, Dielectric, or McIntire). Students will gain an in-depth Real-World experience on Air Dryer Technique, Routine Maintenance and Troubleshooting. This course covers the following:
Why...
|
|
Air Pressure Leak Locating
This highly intense Hands-On 3-day or 4-day course provides an in depth
Real-World experience of Air Pressure and Leak Locating.
Identification of Both Tools and Materials Used in Pressurization
OHMS Law of Air Pressure (pressure-flow- resistance)
Leak Locating Formula...
|
|
Copper Cable Splicing
This Hands-On course is suited for the technician who will be splicing, maintaining and test accepting paired copper cables in the OSP. This course will train students to splice and maintain cables in aerial, and direct buried applications. Students will learn how to splice cables in new...
|
|
Fiber Optic - ISP/LANs (Inside Plant/Local Area Cable Networks)
This Hands-On 3-day course is designed to provide technicians with a practical understanding of fiber optic theory and fiber applications in Local Area Network, Security and Closed Circuit TV systems.
This course provides the knowledge and skills to help students design, install, terminate, test, ...
|
|
Fiber Optic Advanced Splicing
This 2-day Hands-On training course provides "Real-World Experience" to fiber optic mechanical and fusion splicing. The course material covers a range of splicing applications and prepares each student to understand premise (ISP) and outside plant (OSP) splicing as well as maintenance skills used fo...
|
|
Fiber Optic Advanced Testing
This 2-day Hands-On training course provides "Real-World Experience" to testing required for communication fiber optic cabling. This course covers a range of testing requirements set forth by TIA & EIA standards and prepares each student to understand premise and outside plant (OSP) fiber optic ...
|
|
Fiber Optic Emergency Restoration
Fiber Optic Emergency Restoration Training.
Outline Coming Soon!...
|
|
Hands-On Advanced OSP Fault /xDSL
Field Testing & Troubleshooting
Course Description
This 3 day Advanced Hands-On course is designed to give experienced field technicians the opportunity to implement their skills troubleshooting voice and data circuits. This course is based in the field, for technicians to put into action the knowledge and hands-on ...
|
|
Hands-On DSL Combo IMT Technician and Customer Support
This combination 3-day Hands-On course will cover the following:
DSL Installation, Maintenance & Troubleshooting
2-day Hands-On course provides in-depth instruction for Installing, Maintaining
and Troubleshooting DSL services for technicians. Attendees will learn the inner
...
|
|
Hands-On DSL IMT (Installation, Maintenance & Troubleshooting)
including: CAT5 & CAT6 Preparation, Installation & Testing
Course Objectives
This 2-day Hands-On course provides in-depth instruction for Installing, Maintaining and Troubleshooting DSL services. Attendees will learn the inner workings as to how the DSL works and the loop parameters required providing uninterruptible service. This wil...
|
|
I & R ( Installation & Repair of Residential Lines )
This 3-day Hands-On course is designed to put that new hire into action, as well as to keep your veteran installers on a fresh track. After students complete both an aerial and buried installation, all installed lines will be test accepted for service.
” Students will get it right or they will rip...
|
|
Noise Mitigation ( Transmission, Bonding, Grounding & Inductive Interference )
Noisy lines are a major headache, which can be treated and eliminated. This
course will train you how to measure, analyze and eliminate problem causing
noise on telecommunications cable facilities. This is a Hands-On course that
will show you, which test equipment to use, and how to use it. Pr...
|
|
OSP Fault I&R refresher Fault Locating & Cable Troubleshooting
This 3-day Hands-On course is designed to not only give the new hire a good insight of the telephone loop, including installation and troubleshooting, but to answer some of the questions the veteran repair person may have…After completion, this Course has a proven track record to reduce PSC complain...
|
|
OSP Tester, Fault Locating & Cable Troubleshooting
This 2-day Hands-On course is a must for your cable repair technicians. This
course will train students to identify and locate faults in copper "pic" outside
plant cables. Students will learn how to analyze a faulted cable pair and select
the correct test set to locate the fault. The...
|
|
Outside Plant Bonding & Grounding
This training course addresses telecommunications Outside Plant construction,
routine maintenance and trouble isolation related to bonding & grounding and
noise mitigation.
This course covers proper bonding & grounding of Outside Plant equipment for the
protection of people from inj...
|
|
Pole Climbing / Working Aloft
This Hands-On 3-day course will train the participants how to safely and effectively ascend and descend wooden poles using pole climbing gaffs and associated equipment.The pole climbing technique that will be taught is the "3-point contact method”. How to circle, and move to perform tasks on the pol...
|
|
T1 & T3 - OMT
Course DescriptionA vast majority of Telecommunications companies use T1 (DS1) and T3 (DS3) systems as the primary method of transporting voice and data on their transmission networks; therefore, having well trained technicians with the ability to install, maintain and troubleshoot these systems is ...
|
|
T1 Spanline, HDSL, HDSL-2 & HDSL-4 - OMT
Operation, Maintenance & Troubleshooting
Course Description
A vast majority of Telecommunications companies use T1 Copper and HDSL Spanlines as the primary method of transporting voice and data on their local loop; therefore, having well trained technicians with the ability to install, maintain and troubleshoot these systems is vita...
|
|
TeleCommunications Bonding & Grounding
This course is designed to educate telecom installers how to correctly bond and ground telecommunications equipment and transmission facilities. Central office entrance facilities both copper and fiber will be covered in this course. Bonding and grounding procedures will follow NEC and RUS practices...
|
|
xDSL for Customer Support ( Provision, Maintenance & Troubleshooting)
This 3 day Hands-On course provides “Real-World Experience” for help-desk and technical support personnel to solve customer related issues relating to their DSL connection and services.
This course will provide students the practical skills to solve DSL Customer Support issues, fast and effectively...
|
